Description: 【USA Stock & Located in USA & fast shipping】Ship from USA Warehouse fast shipping service to US Customers〖USA〗 6 Axis NVCM USB Motion Mach3 Control Card CNC Stepper Motor Breakout Board Parcel include: 1 x 6 Axis NVCM Mach3 Motion Control Card 1 x USB Cable English user manual and plug-in file will send by email. Descriptions: 6 Axis NVCM Mach3 USB Motion Control Card ♞【Support software】This NVCM card support Mach3 software, through USB port to communicate with computer. ♞【DC power supply input】main device is 24V-32V DC power supply input,current should higher than 1A; ♞【Max 6 Axis Control】Can support 6 axis stepper systems maxisim,125KHz pulse output for every axis ♞【PWM output】1 port 0-10V spindle speed analog output interface(can change to PWM output); ♞【Multifunction】 Power supply interface, USB connection interface, Stepper/Servo control output interface, spindle control output interface, Estop and limited switch and tool setting input interface and so on. 1. Performance parameter1) Support USB;2) 16 ports photoelectric isolated input interface;3) 16 ports photoelectric isolated output interface;4) 1 port 0-10V spindle speed analog output interface(can change to PWM output);5) can support 6 axis stepper systems,125KHz pulse output for every axis;6) ARM motion control chip;7) Main device is 24V-32VDC power supply input,current should higher than 1A; 2.Product connection define and method the connection of the controller includes power supply interface, USB connection interface, MPG interface, Stepper/Servo control output interface, spindle control output interface, Estop and limited switch and tool setting input interface and so on. Now we descript them in details as below. Now we descript them in details as below. 1.USB port As the Figure showed, Marked No. 1 position is the USB port. Mach3 connect to this board through the USB port. 2.Main power input No.1 terminal block is Main power input interface, need input 12-40VDC/above 20W. There is silkprint "+" and "-",left terminal is "+" and right terminal is "-". 3.Limit/Home/Estop/Probe input port Marked No. 3 position is the input port. they are the optical isolated Input interface. The silkprint INP1 INP2 GND INP3 INP4 INP5 INP6 INP7 INP8 INP9 GND IN10 IN11 IN12 IN13 IN14 IN15 IN16 GND 12V on the board connect to PIN1-16 of the mach3. 4.This interface has been cancelled 5.MPG port 6.Universal output interface 2 7.Spindle control output/ Universal output interface 1 8.Stepper motor driver port 3. Stepper motor control interfaceThe marked No. 8 are 6 axis stepper motor controller port. They areX/Y/Z/A/B/C from left to right. Each axis's pin is defined as COM+/CP-/DIR- from left to right. 4. Spindle control output/ Universal output interface 1 We define the interface from left are: GND1(Output GND),VSO(0-10V adjustable speedoutput),OT1,OT2,OT3,OT4.Take Nowforeuer inverter as the example. Spindle control output and the inverter connectionshowed as Figure 2-7.If ACM and DCM are closed,only need to connect one port.VSO real output voltage=10V*s spindle setting speed/max spindle speed.Forexample,if maxspindle speed is 24000,current spindle speed is S=18000,so the VSO outputvoltage=10*18000/24000=7.5V.Max. spindle speed setting ports ,open it from Pulley from Menu config.The current spindle speed can be set by S directive or Mach 3 spindle setting speed module. 3 lines Proximity Switch 3 lines Proximity Switch connection,brown cable for Proximity switch connect with 12V,Black cable connect channel, blue cable connect with GND1. Only support NPN 3 lines proximity switch. 2 lines Proximity Switch 2 lines Proximity Switch/ordinary fretting switch / drawing Spindle control output/ Universal output interface 1 We define the interface from left are: GND1(Output GND),VSO(0-10V adjustable speed output),OT1,OT2,OT3,OT4. Spindle control output and the inverter connection showed as Figure.If ACM and DCM are closed,only need to connect one port.VSO real output voltage=10V*s spindle setting speed/max spindle speed.Forexample,if max spindle speed is 24000,current spindle speed is S=18000,so the VSO output voltage=10*18000/24000=7.5VMax. spindle speed setting ports,open it from Pulley from Menu config. The current spindle speed can be set by S directive or Mach 3 spindle setting speed module.5.Product SizeThe product overall size is 150mm*84mm*20mmThe bottom install size is 125.5mm*71.5mm MPG port Shipping Please open the package and check if there are some damages before sign,if there are some damages,please do not sign and contact us immediately. Problem&Feedback Please give us the opportunityto resolve any problem when you have,we concern your problem and we will try our best to resolve it. Pls contact us before you want to leave any negative feedback. Refund Any reason required for all refund. Item must be in it's original condition and no physical damage,buyer responsible for all shipping cost. When you have the parcel,and not satisfied the goods or it is other problem like as broken,pls tell us the detail reason and provide the photos.
Price: 53 USD
Location: New York
End Time: 2024-08-11T05:02:02.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: RATTMMOTOR
port: USB port
Model: NVCM
Input Voltage: 24-32VDC
MPN: Does Not Apply
Country/Region of Manufacture: China
Axis: 6-Axis
