Description: Tung Hsing 2 HP 1 Phase 110/220 Volt 1725 RPM Electric Motor with a step Pulley. Pulley has a chip I powered it up and it runs well.It has 2 threaded mounting holes in the flange they are approx. 9.250 center to centerI tried to remove the pulley set screw but could not get it out the shaft measures 25mm under the pulley so assuming there is a shoulder for the pulley to rest on the shaft is probably 24mm. the motor tag says 110/220 It is reversable. New take-off motor this is surplus to a now closed machine dealer that kept spare parts on the shelf for their equipment they sold. [Please Look at all the pictures they are part of the description] [B1-F1-R2-S4-2]
Price: 179.99 USD
Location: Elysburg, Pennsylvania
End Time: 2024-09-16T18:51:28.000Z
Shipping Cost: 20 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Actual Rated Input Voltage: 220, 110
Inverter/Vector Duty Rating: Not Inverter/Vector Duty Rated
Special Motor Construction: General Purpose
Base RPM: 1725
MPN: 65800
Insulation Class: B (Max 266°F)
Current Type: AC
Service Factor: 1.00
Full Load Amps: 31/15
Rated Load (HP): 2
IEC Frame Size: N/A
NEMA Design Letter: Design B (General Purpose)
AC Frequency Rating: 60 Hz
Enclosure Type: ODP (Open Drip-Proof)
Shaft Type: Straight
AC Motor Type: Induction/Asynchronous
Shaft Diameter: Tapered
Mounting Type: Face-Mounted, Flange-Mounted
DC Stator/Winding Type: N/A
Brand: Tung Hsing
Reversible/Non-Reversible: Reversible
IP Rating: Not Rated
Nominal Rated Input Voltage: 110 V, 220 V
AC Phase: Single Phase
Country/Region of Manufacture: Taiwan
