Description: Set up model trains to continuously travel back and forth along a section of track - such as a trolley cycling between two stations. Perfect for runs along one or two walls, displays, etc. For DC track control, does not work with DCC controlled trains. The train travels the length of the track and then stops (possibly at a station). After a time the power is reversed and the train travels to the other end of the track where it stops. The cycle is then repeated. Total time – one way travel plus station wait – is user controlled between 30 seconds and 5 minutes. Designed for HO and N gauge trains. See diagram for connection information. Requires soldering of diodes (included) across a rail gap near both ends of the line. Track is not included. Minimum track voltage for proper operation is ~5V. Features:- Turnkey controller - brand new, fully assembled and tested.- Toggle switch included on the board to stop/start the train activity- Simple knob turn to adjust delay, no complicated programming sequence- LED indicator to show when power is available to the train- Uses track power so no need for batteries, add’l power supply or auxiliary power connection- Compact size – 1 ½” x 2”. Detailed instructions included.- Includes diodes to be connected to tracks, mounting spacers and #6 mounting screws Not for DCC controlled trains. Not for reversing (lollipop) track layouts. Not for circular track layouts. Not for O-gauge or other trains with a working voltage significantly greater than 12V.
Price: 35 USD
Location: Monument, Colorado
End Time: 2025-01-23T23:24:59.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Type: Transformer
Power Type: DC
Gauge: HO