Description: Snow Performance Gas Stage 1 Boost Cooler Water/Methanol Injection KitPart Number 201 Race gas quality fuel on pump gas! Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! The Snow Performance Stage 1 Boost Cooler™ water methanol injection kit is available for all forced induction applications (Supercharged/Turbocharged) and uses a adjustable boost switch to inject a fixed amount of water methanol into the system until boost goes below the switch set point. Proven to deliver 30-70 HP increases to all forced induction applications! This makes it a good choice for low to medium boost set ups, drag race applications, and vehicles with a positive displacement supercharger (Roots/Twinscrew) looking for an octane enhancement and cooler intake charge. Activation can also be set up through any other user chosen switch, such as a full throttle switch, nitrous switch, etc. This kit utilizes the only OEM approved water methanol injection pump on the market with proprietary heat flange, twin seals, and custom motor winding to run cooler and longer than the competition. The Extreme Environment™ 300 PSI UHO Pump is designed to be in the elements with O-Ring connections that are then sealed and potted at our Colorado facility to ensure no moisture can enter the pump internals. Compare this to pumps that us a pump "sleeve". These sleeves will keep moisture around the pump unit leading to corrosion as well as trap heat to greatly decrease pump life. The Stage 1 comes standard with 100% methanol resistant components using stainless steel, nickel plating, EPDM, and hard anodizing to ensure years of continued use. Tie that in with new Snow Performance ACU-SEAL™ compression fittings for guaranteed leak free operation even when using 100% methanol. For a extremely robust, reliable water methanol injection experience that won't brake the bank look no further than the Snow Performance Stage 1 Boost Cooler™! Features: U.S.A. MadeAdjustable Water Methanol Engagement & MonitoringRecommended For High HP, Drag Race, and Positive Displacement Supercharger ApplicationsSupports 1,000+ HP100% Methanol Resistant (Stainless Steel, Nickel Plating, Hard Anodizing, EPDM)Snow Performance Hyper-Sonic™ Water Methanol NozzleSnow Performance ACU-SEAL™ Water Methanol Compression FittingsSnow Performance OEM Approved Extreme Environment™ 300 PSI UHO Water Methanol PumpSnow Performance Running "S" Engraved Low Profile Nozzle HolderSnow Performance Running "S" Engraved Low Profile High Flow Check ValveWhats In The Box:Snow Performance Boost Cooler™ Kit Box Extreme Environment™ 300 PSI UHO (Ultra High Output) Water Methanol Pump (100% Methanol Resistant) 3 QT Water Methanol Tank E-6000 Sealant (100% Methanol Resistant)(1) 3/8" NPT - 1/4" Elbow ACU-SEAL™ Compression Fitting (Nickel Plated 100% Methanol Resistant) (2) 3/8" NPT - 1/4" Straight ACU-SEAL™ Compression Fitting (Nickel Plated 100% Methanol Resistant)(3) 1/8" NPT - 1/4" Straight ACU-SEAL™ Compression Fitting (Nickel Plated 100% Methanol Resistant)Snow Performance Hyper-Sonic™ Water Methanol Nozzle (Stainless Steel 100% Methanol Resistant)Snow Performance Low Profile Nozzle Holder (Hard Anodized 100% Methanol Resistant) Snow Performance Low Profile High Flow Check Valve (Hard Anodized 100% Methanol Resistant)20' High Temperature Nylon Tubing (800 PSI Rating 100% Methanol Resistant) 18" High Pressure Boost LineBoost "T" Green LED Adjustable Boost Switch (1-15 PSI) Relay Harness 20 AMP Fuse / Fuse Holder Snow Performance DecalRequired Hardware Needed For Install Type Of PumpProprietary 300 PSI UHO Pump, Dual Outlet EPDM Seals, Fully Adjustable, Proprietary Heat Dissipation Flange, (2) 1/4" Push-lock Inlet/Outlet Fittings, Dimensions (4"L x 7 1/4"H x 3 3/4"W - Including Mounting Bracket)Standard Reservoir3 Qt Reservoir, Black, Snow Performance Logo Red, Dimensions (8.63"L x 10"H x 4.12"W - Including Tabs/Cap)ControllerAdjustable (1-15) PSI Boost SwitchNozzleTwo nozzles sized to your FWHP and boost levelsTubing1/4" O.D. High Temp Nylon Tubing (800 PSI Burst Rating)AccessoriesFluid Level Sensor, Green/Red LEDs, Nozzle Holder/Check Valve ComboFitmentAll Forced Induction (Supercharged/Turbocharged) VehiclesWarrantySnow Performance 1-Year Warranty Free shipping to the lower 48 states. If you are outside of this area please select a calculated shipping method or contact us for a discounted shipping quote.
Price: 375 USD
Location: Cypress, California
End Time: 2024-09-26T03:40:58.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Return policy details:
Manufacturer Warranty: 1 Year
California Prop 65 Warning: This item is found to have compounds and chemicals known to the State of California to cause cancer, birth defects, and reproductive harm
Other Part Number: Water/Meth Injection Forced Induction Turbo
Performance Part: Yes
Country/Region of Manufacture: United States
Material: Multiple Materials
Universal Fitment: Performance/Custom
Manufacturer Part Number: SNO-201
Brand: Snow Performance
