SCHWINN 27"/28" BICYCLE SPEEDOMETER HUB DRIVE SET HURET BIKE WHEEL SPEEDO KIT

Description: This is a clean used example of a vintage speedometer drive by Huret, Schwinn part number 08 465, for 27" or 28" front wheels with bolt-on axles (not quick-release hub skewers), a good long-arm example with white dust cap (showing some age discoloration), cleaned, repacked and in good working order. Its drive ratio is 1:2.2. This drive is compatible with the chrome Schwinn Approved Huret speedometers and drive cables (not included; see my other listings for examples of those), as well as Huret-branded bicycle speedometers. Although these were labeled for Schwinn as 27" hubs, Huret-branded versions of this same part, with the same output ratio, are certified for either 27" or 28" by the factory. (It does not fit the large, round, 3"-diameter Stewart-Warner speedometers.)The two drive arms have a 4¾" (120mm) span, each extending 2 3/8" from the center of the axle hole. I'm also including a new accessory hardware kit, containing:One 5/16" axle bushing (silver) for models with standard 5/16" front axles and coaster or caliper brakesFour installation washers, Schwinn 39 601, to be used to clear either the inner face of the front fork or the axle cone nut, as needed One foam dust ring seal A black 3/8" axle bushing can be substituted for the silver 5/16" bushing on request. (Vintage Schwinn lightweights with bolt-on axles used 5/16" axles. Please measure the front axle diameter of your bike before ordering if you have a non-Schwinn axle.) The axle hole in the center is 7/16" diameter.This is a vintage used piece in clean condition and full working order. I packed it with some fresh grease, and it turns smoothly. I am also including a free scanned reprint of an original instruction sheet to help you get it all installed. NOTES: This is not for quick-release front hubs. This is only for bicycles with bolt-on front axles. This is not for Stewart-Warner speedometers. This is a Huret speedometer part. This auction is for the drive hub, bushing and washer kit only. If you do not see it in the photos, it is not included! Free Shipping applies to domestic USPS Ground Advantage mail only. See the Shipping and Handling section of this listing for all rates, including international Shipping charges. Please be sure you know the Shipping charge to your address before bidding or buying. Import duties, taxes and charges are not included in the item price or shipping cost. You may need to pay these charges to your post office. (They are not charges from me.) These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Sorry, we do not understate package value, or mark it as a Gift. See my other auctions for more vintage Schwinn speedometer items! Except where noted, combined shipping is available for all items ending on the same evening. Please do not copy any part of this listing without permission.

Price: 39.95 USD

Location: Chicago, Illinois

End Time: 2025-01-06T05:00:01.000Z

Shipping Cost: N/A USD