Description: INTER-MIX 10 “Thick-Set” Adhesive/Seam Sealer Is a non-sagging, firm, semi-flexible, adhesive/sealant designed for sealing vertical and horizontal seams and joints on automobiles and truck applications. May be applied to bare metal and primed sheet metal joints. Excellent adhesion to: bare metal primed metal SMC FRP fiberglass aluminum most plastics Can be sprayed with our 2K Spray System • Can Be Applied to Bare Metal! • Can Be Feather-Edged. • Corrosion Protection. DIRECTIONS 1. Surface must be clean and free of dirt, grease, oil, rust, old seam sealer and any other contaminants. 2. Apply directly to bare metal, epoxy or urethane primed surface. 3. Follow the IES dual cartridge set up instructions for loading cartridge into the dispensing gun. 4. Dispense IES Bare Metal Seam Sealer into the joint or seam. Smooth out if desired with tool, finger or brush. 5. IES Bare Metal Seam Sealer will set up in approximately 10 minutes. 6. Scuff or sand sealer with 320 grit sandpaper prior to priming or painting. 7. Prime and paint per manufacturer’s specifications. PROPERTIESMixed Color GRAYMix Ratio 1:1 Work Time 10-15 Minutes Handling Time 20-30 Minutes Part Paintability 45 Minutes Sealer Sandability 45 Minutes Full Cure Strength 6-8 Hours 1500 Hour Salt Fog Test Passed (ASTM-B117) All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity
Price: 34.99 USD
Location: San Antonio, Florida
End Time: 2024-10-10T10:23:39.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Color: Gray
Brand: International Epoxies & Sealers
Manufacturer Part Number: 8605
