Description: Iron Planet Hobbies ESU 59925 ~ LokPilot 5 Nano ~ E24 DCC Motor Decoder The LokPilot 5 micro DCC DCC Direct and the LokPilot 5 nano DCCare the “little brothers” of the LokSound 5 micro DCC Direct and theLokSound 5 nano DCC. These non-sound Decoders share the samedimensions and functions with the LokSound decoders, but withoutsound.These decoders are used wherever the sound is to be dispensed with,but all other properties are to be the same. This applies in particularto the motor control and to enable Consist Operation together withLokSound 5 decoders. Operating modesThe LokPilot 5 micro DCC DCC Direct and the LokPilot 5 nano DCCare “pure-bred” DCC decoder. 14 to 128 speed steps are as natural as2- and 4-digit addresses. Up to 32 functions can be triggered. Thanksto Rail¬ComPlus®, the decoders log on to a suitable DCC System fullyautomatically.They master all DCC programming command stations. Auxiliary registers exist for DCC systems that can only program CVs from 1-255.The LokPilot 5 micro DCC DCC Direct and the LokPilot 5 nano DCCdecoder recognizing the Märklin® braking sections as well as ZIMO®HLU / ZACK commands or the Lenz® ABC system. Braking with DCCbrake modules or with DC voltage is also possible. They also stop witha Selectrix® brake diode. An ABC automatic shuttle train enables automatic commuting between two stations.They can be used on analog DC trains. The maximum speed can be setseparately. The decoder switches Motor controlThe motor control of the LokPilot 5 micro DCC DCC Direct and theLokPilot 5 nano DCC has been fundamentally improved again. A variable adjustable PWM clock frequency from 10kHz to 50kHz ensuressuper quiet operation ,especially with bell-armature motors- The typical “hum” is a thing of the past. The load control now has up to 10CVs which can be adjusted for difficult cases. The unique “Autotune”function enables the automatic calibration of the decoder to the motor. The LokPilot 5 DCC decoder delivers up to .75A of motor current.Enough juice for most motors. FunctionsThe LokPilot 5 micro DCC Direct decoders have up to 10 directly soldered LEDs. Two of them are intended for front and rear head lighting,two more are connected to the AUX3 and AUX4 outputs to switch e.g.number boards. A further 6 LEDs on the bottom are intended for ditchlights, but can also be used for other lighting purposes on request.All important lighting functions are available. The brightness of eachoutput can be set separately.Despite its small size, the LokPilot 5 Nano DCC has 8 powered functionoutputs as well as 5 logic level outputs on the new, extremely smallESU E24 interface. All important lighting functions are available. Thebrightness of each output can be set separately. ProtectionOf course, the motor output and the function outputs are againstoverload protected. We want you to enjoy your decoder for as longas possible. Operation reliability A PowerPack to bypass dirty track can be fitted to the LokPilot 5 Nano DCC (NOT to the LokPilot 5 micro DCC Direct!). Designed with future developments in mindThe LokPilot Nano Standard is update capable and can get is new firmware with the aid of the ESU LokProgrammer. Thus your decoder will always have current state-of-the-art technology! We are an authorized ESU dealer.Thanks For Looking!
Price: 34.72 USD
Location: Springfield, Missouri
End Time: 2024-10-01T03:14:54.000Z
Shipping Cost: 6.82 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Brand: ESU
Type: Decoders
Assembly Status: Ready to Go/Pre-built
Product Type: Electrics & Electronic
MPN.: 59925
UPC: Does not apply
MPN: 59925
Product Type.: Accessory
Age Level: 17 Years & Up
Country/Region of Manufacture: China
