EMX ULTRA-MVP-2 TWO CHANNEL MULTI-VOLTAGE VEHICLE LOOP DETECTOR

Description: EMX ULTRA-MVP-2 TWO CHANNEL MULTI-VOLTAGE VEHICLE LOOP DETECTOR EMX ULTRA-MVP-2 TWO CHANNEL MULTI-VOLTAGE VEHICLE LOOP DETECTOROVERVIEW OF OUR ULTRA-MVP-2The ULT-MVP-2 two channel vehicle loop detector senses metallic objects near an induction loop. This detector automatically adjusts from 12 VDC up to 240 VAC which eliminates the installer’s need to match available power to an appropriately rated vehicle detector. The ULTRAMETER™ display makes set-up easy by displaying the optimum sensitivity setting required to detect a vehicle positioned near the loop. Ten sensitivity settings allow for fine adjustment of the detection level. The ULT-MVP-2 provides relay contact outputs indicating vehicle presence for each channel separately and AB logic for direction indication. The relay output for each channel may be set for pulse or presence, or the EMX exclusive feature, Detect-on-Stop™ (DOS® ). The ULT-MVP-2 features automatic sensitivity boost (ASB) and infinite or normal (5 minute) presence. Four frequency settings provide flexibility in preventing crosstalk in multi-loop applications. FEATURES OF OUR TWO CHANNEL MULTI-VOLTAGE VEHICLE LOOP DETECTORSingle or dual channel unit for US or EU wiringULTRAMETER™ displays optimum sensitivity setting/crosstalk interference10 sensitivity settings4 operating frequenciesAutomatic sensitivity boost (ASB), delay, fail-safe/fail-secure and infinite or normal (5 min.) presenceSmall size: 73 x 38 x 78mmSocket mount -11 pin (JEDEC B11-88)CE compliantDETECT-ON-STOP™ allows detection only when a vehicle has come to a complete stop on the loopSensitivity10 levels, 0-9ULTRAMETER™ DisplayIndicates optimum sensitivity level, 0-9 Diagnostic aidLoop frequency4 settings (low, med-low, med-hi, high)Loop inductance20…1000µH (Q factor > 5)Grounded loopIsolation transformer allows operation with poor quality loopsAutomatic tuningDetector tunes to loop on power-up and following frequency count functionEnvironmental trackingAutomatic compensationSurge protectionLoop circuitry protected by surge suppressorsChannel 1 relaySPST relay contacts (form A)Channel 2 relaySPST relay contacts (form A)Contact rating (resistive load)2A @ 30VDC, 0.5A @ 125VACDetect / channels 1 and 2Red LEDDetect-On-StopRequires vehicle to stop for a minimum of 1 second (1-2s typical)ASB (Automatic Sensitivity Boost)Increases sensitivity after initial detection to prevent dropout due to high-bed vehiclesPower12…60 VDC (Max. 1.0 VA) 12…240 VAC (48…62Hz) (Max. 2 VA)Operating current37mA standby / 55mA detectOperating temperature-40°C…82°C (-40°F…180°F) 0…95% relative humidityDimensions (L x W x H)73mm (2.9”) x 38mm (1.2”) x 78mm (3.1”)Weight0.25 lbs. (113 g)HousingABS plastic, IP30ConnectionsSocket mount – 11 pin male (JEDEC B11-88) Payments & Returns Policy

Price: 129.95 USD

Location: Miami, Florida

End Time: 2024-10-07T18:53:47.000Z

Shipping Cost: 0 USD