Description: Store Categories Store Categories Other2 Wholesale Auto cables & adapters Protective cases for phones Development Boards SDR - Software Defined Radio SIM & Smart card tools Phone accessories Phone repair tools Phone spare parts Phone unlocking tools Phone cable & adapters Other ITEMS on SALE DescriptionReport Item / Suspicious ActivityThe DE10-Nano board has many features that allow users to implement a wide range of designed circuits, from simple circuits to various multimedia projects.The following hardware is provided on the board:FPGA1) Cyclone® V SE 5CSEBA6U23I7 device.2) Serial configuration device – EPCS128.3) USB-Blaster II onboard for programming; JTAG Mode.4) 2 push-buttons.5) 4 slide switches.6) 8 green user LEDs.7) Three 50MHz clock sources from the clock generator.8) Two 40-pin expansion header.9) One Arduino expansion header (Uno R3 compatibility), can connect with Arduino shields.10) One 10-pin Analog input expansion header. (shared with Arduino Analog input)11) A/D converter, 4-wire SPI interface with FPGA.12) HDMI TX, compatible with DVI v1.0 and HDCP v1.4.HPS (Hard Processor System)1) 800MHz Dual-core ARM Cortex-A9 processor.2) 1GB DDR3 SDRAM (32-bit data bus).3) 1 Gigabit Ethernet PHY with RJ45 connector.4) port USB OTG, USB Micro-AB connector.5) Micro SD card socket.6) Accelerometer (I2C interface + interrupt).7) UART to USB, USB Mini-B connector.8) Warm reset button and cold reset button.9) One user button and one user LED.10) LTC 2x7 expansion header.The block diagram of the board:All the connections are established through the Cyclone V SoC FPGA device to provide maximum flexibility for users. Users can configure the FPGA to implement any system design.FPGA DeviceCyclone V SoC 5CSEBA6U23I7 DeviceDual-core ARM Cortex-A9 (HPS)110K programmable logic elements5,570 Kbits embedded memory6 fractional PLLsConfiguration and DebugSerial configuration device – EPCS128 on FPGAOnboard USB-Blaster II (Mini-B USB connector)Memory Device1GB (2x256Mx16) DDR3 SDRAM on HPSMicro SD card socket on HPSCommunicationOne USB 2.0 OTG (ULPI interface with USB Micro-AB connector)UART to USB (USB Mini-B connector)10/100/1000 EthernetConnectorsTwo 40-pin expansion headersArduino expansion headerOne 10-pin ADC input headerOne LTC connector (one Serial Peripheral Interface (SPI) Master ,one I2C and oneGPIO interface )DisplayHDMI- compatible TX, compatible with DVI v1.0 and HDCP v1.4ADC12-Bit Resolution, 500Ksps Sampling Rate. SPI Interface.8-Channel Analog Input. Input Range : 0V ~ 4.096V.Switches, Buttons, and Indicators3 user Keys (FPGA x2, HPS x1)4 user switches (FPGA x4)9 user LEDs (FPGA x8, HPS x 1)2 HPS reset buttons (HPS_RESET_n and HPS_WARM_RST_n)SensorsG-Sensor on HPSPower5V DC inputThe Shipping List: © 2019, All rights reserved
Price: 329 USD
Location: China
End Time: 2025-01-07T06:40:55.000Z
Shipping Cost: 12.5 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: ALtera
Type: development board
Modification Description: As shown in the picture
MPN: Does Not Apply
Applicable Regions: As shown in the picture