ADE RD3-021-G NUWA PRO Shake Awake GREEN Dot For Ruger Mark Pistol -

Description: Item DescriptionADE is releasing several Pro Series red dots. This 2023 PRO SERIES for ADE RD3-021(2022-present) Nuwa green dot is called NUWA PRO(RD3-021PRO). The additional features that the PRO series includes are Multi Reticle Technology(only on select models, check product description see if this model comes with this feature) and Motion Activated System. This ADE NUWA PRO is designed to fit any pistol/mounting plate/slide/optic cut with RMS/RMSC screw pattern/footprint. The NUWA PRO has a fixed 66 MOA Circle with 3 MOA Dot(cannot switch between). It is one of the lightest weight and smallest RMS footprint green dot with full metal construction, top battery loading and motion activated function With Motion Activated System, while the NUWA PRO is turned on, the green reticle illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, it instantly switches on the illumination at the previous brightness setting. Operates with a single CR1632 battery. 6 daylight brightness setting and 1 NV setting. The Night Vision Dot is not visible by the human eye, it is can only be seen thought a Night Vision. Battery life up to 10000 hours. Ade Nuwa PRO created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distance/gap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacturer equipped rear sight, ADE NUWA's rear white dot will act as a pistol factory original rear sight for Co-Witness. Comes with the adjustment tool, user manual, lens cloth, red dot cover, CR1632 battery, screws. Parallax-free & Unlimited Eye Relief. Made of aircraft aluminum in anodized black finish with multi-coated lens.Weight approximately 15.5 grams(0.55oz), (Length)1.5" x (Width)..88" x (Height).89" Designed to fitCanik Elite TP9 SCCanik METE SFXCanik METE SFTSig P365X/P365XL/P365XL SPECTRE COMPRuger Max-9Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS)Springfield Hellcat OSPSpringfield Hellcat ProSpringfield XDS MOD 2 OSPSpringfield Elite 3.8” Compact OSP 9mm S&W Shield 2.0 Optics Ready, S&W 9mm EqualizerS&W M&P9 shield plus Optics ReadyS&W MP9 EZS&W M&P shield plus performance centerWalther PPS M2 Optics ReadyKimber Mako7Girsan MC1911SC UltimateMossberg MC2SC, Ruger Max 9Masada Slim, Ruger Mark IV 22/45 Lite Optic-Ready with Co-Witness SightsTaurus GX4 Toro / Taurus TX22 Compact / Taurus 865 ToroPlus any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint. Comes with 3 pairs of screws for Sig P365XL/X, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cut/slide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you can’t get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size.--------------------------------------------------------------------------------------------------------------- ADE RD3-006B, RD3-009, RD3-012, and RD3-013 fit optic cut/plate that is compatible with Vortex Venom/Burris Fastfire/Doctor footprint ADE RD3-018 Spike, RD3-021 Nuwa fit optic cut/plate that is compatible with Shield RMS/RMSC footprint ADE RD3-019 Stingray, RD3-020 Raptor, RD3-023 Valkyrie Gen2 fit optic cut/optic plate that is compatible with Trijicon RMR footprint Comes with 3 pairs of screws for Sig P365XL/X, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cut/slide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you can’t get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size. Payment We accept any payment method ebay allows such as paypal at the checkout. Shipping We ship all items within one business day of receiving cleared payments. For payments received by 2pm PsT(Pacific Daylight Time), the package usually ships in the same day. Free shipping within 1 business day with tracking number. No international shipping!Other You can return any purchase that is Undamaged in like new condition within 30 days for full money back or exchange. If you have any question, please click contact seller. We always reply emails within 8 hours.Purchase Eligibility We have to accept the fact that things are different than when we were younger, so please make sure you can legally order and possess this item BEFORE you submit your bid. All NFA rules apply, where applicable. YOU are responsible to following ALL laws and regulations regarding the ownership, possession and end use of this item. Track Page Views With Auctiva's FREE Counter

Price: 106.17 USD

Location: Oregon City, Oregon

End Time: 2024-08-20T18:25:37.000Z

Shipping Cost: 0 USD