2 Universal 2.25" Steel Bar Clamps 2 Bolt Roll Cage Fabrication w .375” Thread

Description: 2 Universal 2.25" Steel Bar Clamps 2 Bolt Roll Cage Fabrication w .375” Thread 2 - Universal DOM Steel Bar Clamps 2 Bolt for 2.25" Diameter Barwith 3/8"-16 Threaded Mounting Hole This Listing is for TWO 2.25" Bar Clamp with SS Hardware This clamp features a small flat milled into the back half of the clamp. This back half is also drilled and tapped to accept a standard 3/8"-16 bolt. This allows for all kinds of different mounting options. I am sure you can come up with a dozen ways to use this very versatile clamp. Bolt is not included. Welding to the clamp is also an option as well. Our universal fabrication round bar clamps are made from DOM (Drawn Over Mandrel) mechanical steel tubing and manufactured for us locally, right here in the U.S.A. Our clamps are machined on all surfaces including the inner diameter to ensure a perfect fit. We have used these clamps in our own production products for years and have been asked by our customers again and again to offer just the clamps by themselves, so here they are!! These clamps are perfect for all of kinds of fabrication projects: Making Roll Cage Braces Building Seat Belt Harness Bars Custom Removable Ice Cooler Racks One Off Custom Lights Bars Custom Grab Bar Handles Removable Light or Whip Mounting Tabs GPS & Camera Mounts Mirror Mounts Plus Much More These are some of the nicest clamps available in the market place. They feature recessed bolt holes for the cap screws and blind threaded holes on the mating side for a smooth clean look. The back side of the clamp is completely smooth, not only giving the clamp great looks, but making it easy to weld where ever you need to on the clamp. Lastly, we finish off the clamp with durable stainless steel hardware. We have gone the extra step and sourced the correct stainless steel bolts to ensure your project looks good for years to come. Listing is for TWO - 2.25" clamps to be used With 2.25" round tubing. Clamp sizes available: 1.0", 1.25", 1.50", 1.75", 1.875", 2.0", 2.25" and 3.0" See our other listings or email us. **Note: A question we get asked often: Q: Is there suppose to be a gap between the two clamp halves when installed? A: Yes, these clamps are made for DOM tubing. This is the result of cutting tubing into two pieces, material is removed. This also insures you are able to get the clamp tight! If the clamp halves touch and bottom out, there is no guarantee you really have them tight! MADE IN THE U.S.A - Made for us locally here in Southern CaliforniaNot a cheap over seas piece. Clamps come in raw steel finish... Specifications: Clamp I.D. = 2.25" Clamp O.D. = 3.00" Clamp Width = 1.0" Clamp Thickness = 3/8" Clamp Bolts = 2 Applications: All 2.25" Round Tubing / Bar All Factory or Aftermarket Cages Built with 2.25" Tubing Factory Roll Cage Tubing Diameters: (Reference ONLY - Check Your Ride!!!!) Arctic Cat Wildcat - 1.75" Prowler (round aftermarket cage only) Can Am Commander Cage - 2" Honda Big Red - 1.625" Kawasaki Teryx Perimeter - 1.875” Top Crossbars - 1.75” Teryx 4 Perimeter - 1.875” Top Crossbars - 1.75” Polaris Ranger Perimeter - 1.75” Top Crossbars - 1.75” Harness Bar & Rear Bumper Crossbars - 1.5” RZR, S & XP Perimeter - 1.75” Top Crossbars - 1.75” Harness Bar & Rear Bumper Crossbars - 1.5” RZR 4 & XP 4 Perimeter - 1.75” Top Crossbars - 1.75", 1.5" & 1.25" Rear Harness Bar & Bumper Crossbars - 1.5” Redline Revolt - 1.25" Riot - 1.50" Yamaha Rhino Perimeter - 1.75” Rhino Top Crossbars - 1.5” Part # SSM-DOM-2-BC-3816-225-QTY-2 Powered by SixBit's eCommerce Solution

Price: 62 USD

Location: La Palma, California

End Time: 2024-02-08T22:59:25.000Z

Shipping Cost: 0 USD