11-19 Chevy GMC 2500HD 3500HD Extended +1" Heavy Duty Sway Bar End Links

Description: 11-19 Chevy GMC 2500HD 3500HD Extended +1" Heavy Duty Sway Bar End Links - Pair SSM Heavy Duty 1" Longer Sway Bar End Links THIS LISTING IS FOR: 1 - SSM-GM-HD-SBELK-1 - SSM +1 EXT HD SWAY BAR END LINKS - Pair Give your HD a REAL Heavy Duty Sway Bar End Link and stop breaking those stock wimpy end links. These sway bar end links are a Heavy Duty replacement to the factory style end links which are notorious for breaking. The fact that they are prone to breaking should be enough reason by itself to upgrade them, but we have also found a serious clearance issue with the sway bar when running stock length sway bar end links. This clearance issue occurs on many trucks running stock suspension that have been highly leveled out, (raised up in the front), especially if you are running an aftermarket upper control arm kit and or lifting / leveling torsion keys. This by itself will cause a very close tie rod to sway bar clearance issue and on many trucks the two will contact each other. If you upgrade to aftermaket tie rod assemblies such as Fabtech, Cognito or Rare Parts, there for sure becomes a clearance issue with the sway bar. The inner tie rod joints on these heavy duty brand tie rods are much bigger than the factory units and will hit the sway bar. When the truck is raised / leveled the angle of the lower control arm increases, this also pulls the sway bar down as they are attached to each other by the sway bar end link. This combination of bigger inner tie rod joints and increased lower control arm angle will cause the tie rods to hit the sway bar. We have designed a solution to this problem, our SSM 1" longer Heavy Duty Sway Bar End Link Kit!!! NEW AND IMPROVED!! - We have just released our NEW IMPROVED Heavy Duty 1" Longer Sway Bar End Link Kit. This kit now features a 3/4" powder coated solid steel hex bar center section. Larger, correct size, Energy Suspension HYPER-FLEX ™ Performance Polyurethane sway bar end link bushings. These larger bushings are the correct size for the HD sway bar, they are not a universal one size fits all bushing. Bushings are made from a firm polyurethane and provide more overall mass and surface area than a smaller universal bushing. Then we top them off with Grade 8 zinc plated hardware. This unit is far superior than the factory part and will work on a leveled or bone stock truck. End Link Set does both sides. MADE IN THE USA!!! This kit will work on bone stock trucks, stock trucks with leveling kits, or trucks with lift kits that require use of the original length GM sway bar end links. For lifted trucks with super long aftermarket end links, we have a different style unit available for those trucks as well. Applications: 2001-2019 - Chevy Silverado 1500HD, 2500, 2500HD, 3500 (2 & 4wd) 2001-2013 - Chevy Suburban 2500, Avalanche 2500 (2 & 4wd) 2001-2019 - GMC Sierra 1500HD, 2500, 2500HD, 3500 (2 & 4wd) 2001-2013 - GMC - Yukon XL 2500 (2 & 4wd) 2003-2009 - Hummer H2, H2T (8-lug) Does NOT fit 1500 Light Duty Part # SSM-GM-HD-SBELK-1 Powered by SixBit's eCommerce Solution

Price: 54.98 USD

Location: Buena Park, California

End Time: 2025-01-01T22:26:57.000Z

Shipping Cost: 0 USD